MAK Pellet Grill OEM Replacement Hot Rod Ignitor

MAK Pellet Grill OEM Replacement Hot Rod Ignitor

MAK Pellet Grill OEM Replacement Hot Rod Ignitor – 10.5mm Diameter – 120V – 220W

Replacement Ignition Rod for MAK Pellet Grills Manufactured After 2017

Restore reliable ignition to your MAK pellet grill with this replacement hot rod ignitor. Designed for MAK pellet grills manufactured after 2017. For the standard style 10mm hot rods, CLICK HERE.

Built with a durable heating element, high-temperature wiring, and a convenient electrical connector, this replacement ignitor is designed to get your pellet grill firing up again.

Additional Options

Purchase the main product and enjoy discounted* prices on the products listed below

*This product must be present at checkout to enable discount prices on additional options.

$34.99

1 in stock

SKU SD8259 Categories Grill/Hopper Parts, Parts

Product Description

Features & Benefits

Designed for MAK Pellet Grills manufactuered after 2017 – Intended for newer MAK models using the hollow-style hot rod.
Powerful Ignition Performance – 120V heating element designed to ignite wood pellets during the grill’s startup cycle.
10.5mm Nominal Diameter – Designed for applications using the hollow-style 10.5mm hot rod.
High-Temperature Wiring – Silicone-insulated wiring and protective sleeving designed for demanding pellet grill environments.
Pre-Wired Connector – Includes an electrical connector for convenient installation in compatible grills.
Durable Construction – Built to withstand repeated heating cycles and normal pellet grill operation.
Replacement Part – Ideal for replacing a worn-out, damaged, or non-functioning ignitor.

Product Specifications

Specification	Details
Product Type	Pellet Grill Hot Rod Ignitor
Intended Compatibility	MAK Pellet Grills Manufactured after 2017
Style	Standard 10.5mm-Class Hot Rod
Actual Rod Diameter	10.5mm nominal (±0.3mm)
Heating Element Length	93mm nominal (±2.5mm)
Heating Zone	43mm nominal (±1.5mm)
Operating Voltage	120V AC
Heater Resistance	21–29 Ohms at 23°C ±2°C
Rated Steady-State Power	230W ±10% (bare heater core)
Wiring	Silicone Cable with Protective Sleeving
Connection	Pre-Wired Electrical Connector

Compatibility Information

IMPORTANT: This hot rod is intended for MAK pellet grills manufactured after 2017.

Before ordering, please verify your existing ignitor’s diameter, overall length, and electrical connector configuration.

MAK grills manufactured in 2017 or earlier use a standard style hot rod which can be found HERE.

When Should You Replace Your Hot Rod?

A faulty or worn-out hot rod can prevent your pellet grill from lighting properly. Common symptoms include:

Wood pellets feeding into the burn pot without igniting
Grill failing to complete its normal startup cycle
Excessive pellet accumulation during ignition attempts
Ignitor no longer producing sufficient heat
Intermittent ignition or repeated startup failures

Replacing a defective hot rod can help restore your pellet grill’s normal startup operation.